Tilt Control Panel
This window displays the current tilt angle, allows one to tilt by an increment or to go to a desired angle, and contains options for tilt-related parameters.
Tilt Angle Readout
This readout shows the current tilt angle, which should match the tilt readout in the microscope user interface.
These buttons will tilt toward positive or negative tilt angles by the current tilt increment, which is either the basic tilt increment, or this basic increment multiplied by the cosine of the tilt angle if 'Cosine increments' is selected.
Use this button to set the basic tilt increment. A dialog box will appear, with the current value as the default. Enter a value in degrees.
Use this button to set the delay to be applied after tilting by the basic increment. A dialog box will appear, with the current value as the default. Enter a value in seconds. This delay time must expire before a new image is taken with the camera.
Use this button to select cosine tilt increments, in which the increment is proportional to the cosine of the tilt angle.