*** Entries to program tomopitch ***
  ModelFile = tomopitch.mod
  ExtraThickness = 5.0
  SpacingInY = -678.0
  ScaleFactor = 3.0
  AngleOffsetOld = 0.0
  ZShiftOld = 0.0
  XAxisTiltOld = 0.0
*** End of entries ***


 MODEL FILES OR TIMES MUST OCCUR IN ORDER OF DECREASING SAMPLE COORDINATE



 Analysis of positions from line pair at Y =   101.:
 unrotated lines imply added Z shift of  -12.2; thickness of 259.0, set to  260
 slope =  0.0035: to make level, add   0.2 to total angle offset
  rotated  lines imply added Z shift of   -9.3; thickness of 259.0, set to  260


 Analysis of positions from line pair at Y =   512.:
 unrotated lines imply added Z shift of  -48.5; thickness of 270.8, set to  272
 slope =  0.0132: to make level, add   0.8 to total angle offset
  rotated  lines imply added Z shift of  -44.7; thickness of 256.3, set to  260


 Analysis of positions from all line pairs:
 unrotated lines imply added Z shift of  -33.3; thickness of 301.2, set to  304
 slope =  0.0083: to make level, add   0.5 to total angle offset
  rotated  lines imply added Z shift of  -26.3; thickness of 301.2, set to  304

 Pitch between samples can be corrected with an added X-axis tilt of   1.65
 In this case, to make level, add   0.5 to total angle offset
 x-tilted  lines imply added Z shift of  -26.6; thickness of 265.8, set to  266
 
 X axis tilt -  Original:    0.00   Added:    1.65   Total:    1.65
 Angle offset - Original:    0.00   Added:    0.48   Total:    0.48
 Z shift -      Original:     0.0   Added:   -26.6   Total:   -26.6
SUCCESSFULLY COMPLETED