SURFACE ANALYSIS:

 The following parameters are appropriate if fiducials are all on one surface

 Fit of one plane to all fiducials:
 Adjusted slope = -0.1654
 Incremental tilt angle change =   9.39
 Total tilt angle change =         9.87

 The following parameters are provided to indicate the consistency
 of the fit when fiducials are on two surfaces

 Fit of one plane to points on bottom surface:
 # of points =      7
 Z axis intercept =  -59.21
 Adjusted slope =   -0.1851
 Mean residual =     23.237
 X axis tilt needed =  5.50
 Incremental tilt angle change =  10.49
 Total tilt angle change =        10.97

 Fit of one plane to points on top surface:
 # of points =     14
 Z axis intercept =   40.95
 Adjusted slope =    0.0494
 Mean residual =      5.773
 X axis tilt needed = -0.43
 Incremental tilt angle change =  -2.83
 Total tilt angle change =        -2.35

 The following parameters combine the last two results and are
 appropriate if fiducials are on two surfaces

 Thickness at Z intercepts =     100.15
 Average adjusted slope =       -0.0288
 Average X axis tilt needed =      1.55
 Incremental tilt angle change =   1.65
 Total tilt angle change =         2.13

 Unbinned thickness needed to contain centers of all fiducials =         145.
 Incremental unbinned shift needed to center range of fiducials in Z =     9.1
 Total unbinned shift needed to center range of fiducials in Z =         -17.5