# THIS IS A COMMAND FILE TO MAKE AN ALIGNED STACK FROM THE ORIGINAL STACK
#
####CreatedVersion#### 3.10.23
#
# It assumes that the views are in order in the image stack
#  
# The -size argument should be ,, for the full area or specify the desired 
# size (e.g.: ,10)
#
# The -offset argument should be 0,0 for no offset, 0,300 to take an area
# 300 pixels above the center, etc.
#
$newstack -StandardInput
InputFile	WTI042413_1series4.st
OutputFile	WTI042413_1series4_3dfind.ali
OffsetsInXandY	0.0,0.0
TransformFile	WTI042413_1series4.xf
BinByFactor	3
AdjustOrigin	
TaperAtFill	1,0
$if (-e ./savework) ./savework