*** Entries to program tomopitch ***
  ModelFile = tomopitch.mod
  ExtraThickness = 5.0
  SpacingInY = -1042.0
  ScaleFactor = 3.0
  AngleOffsetOld = 0.77
  ZShiftOld = 0.0
  XAxisTiltOld = -0.97
*** End of entries ***


 MODEL FILES OR TIMES MUST OCCUR IN ORDER OF DECREASING SAMPLE COORDINATE



 Analysis of positions from line pair at Y =   108.:
 unrotated lines imply added Z shift of  -43.5; thickness of 151.0, set to  152
 slope =  0.0076: to make level, add   0.4 to total angle offset
  rotated  lines imply added Z shift of  -28.7; thickness of 151.0, set to  152


 Analysis of positions from line pair at Y =   918.:
 unrotated lines imply added Z shift of   18.0; thickness of 202.0, set to  204
 slope =  0.0000: to make level, add   0.0 to total angle offset
  rotated  lines imply added Z shift of   18.0; thickness of 202.0, set to  204


 Analysis of positions from all line pairs:
 unrotated lines imply added Z shift of    0.0; thickness of 238.0, set to  238
 slope =  0.0040: to make level, add   0.2 to total angle offset
  rotated  lines imply added Z shift of    7.6; thickness of 237.7, set to  238

 Pitch between samples can be corrected with an added X-axis tilt of  -1.10
 In this case, to make level, add   0.2 to total angle offset
 x-tilted  lines imply added Z shift of   -5.5; thickness of 216.4, set to  220
 
 X axis tilt -  Original:   -0.97   Added:   -1.10   Total:   -2.07
 Angle offset - Original:    0.77   Added:    0.22   Total:    0.99
 Z shift -      Original:     0.0   Added:    -5.5   Total:    -5.5
SUCCESSFULLY COMPLETED